An Industry First 350 Watts Solid State Amplifier from 0.7 to 6 GHz

Note: There are no slides to download for this presentation.

Overview:
Amplifier Research has recently developed a new solid state, single band power amplifier that outperforms the competition in both output power and bandwidth. Intended as an alternative to TWTA (traveling wave tube amplifier), the 350S1G6 provides wideband high linear output power over a single frequency band of 0.7 to 6 GHz. While the competition only offers this bandwidth in a dual band configuration, the continuous single band operation of the 350S1G6 provides for simplicity of operation. Typical saturated output power above 400 Watts and P1dB above 300 Watts are achievable. In addition to the impressive output power, the 350S1G6 offers low harmonic distortion and high output load mismatch tolerance.

The 350S1G6 is the culmination of years of research and development of hybrid circuit designs utilizing the latest materials, devices and process improvements. The result is an amplifier with greater power density and lower production costs than previously possible.

Anthony PeroniPresenter: Anthony Peroni
Anthony graduated from The Pennsylvania State University in 1991 with a BS an MS degree in Electrical Engineering. For the past 25 years he has been involved in RF and microwave hardware design for both the consumer and defense electronics industry. He has extensive experience in all phases of discrete circuit, hybrid and MMIC design. Prior to joining AR in 2011, he was employed at Spectrum Microwave, M/A-COM, and Motorola.

The following question was presented to the speaker by the attendees during the webinar.

What Is the list price?
Answer: For pricing, please visit www.arworld.us.